S SATC Decal Eraser Wheel Pin Stripe Removal Tool 1 Pack - Black Rubber Wheel with Adapter with Electric Drill - Removes Vinyl, Decals, Graphics & Double Faced Tape

Knowledge is EVERYTHING.I used this wheel to remove the adhesive stuck to the paint on my truck that was left after removing the body side moulding. Use a heat gun to heat up the side moulding and it will peel right off. That’s the easy part.Learn to use this wheel properly and it will make your job of getting the adhesive off the paint very easy without damaging the paint. Important tip: it is not necessary to use a plastic scraper on the adhesive. It will do more harm than good. Don’t ask me how I know.I used this wheel with the supplied mandrel in my cordless drill. Getting a firm grip on your drill is important. The eraser wheel can chatter on the vehicle surface if you don't have a firm grip. I gripped the drill handle and trigger with my right hand to control the drill trigger speed, and then wrapped my left hand around the drill right behind the chuck. I then rested my right hand against the truck surface and used my left hand to push the wheel against the body panel. This is good form because my left hand controls the force pushing the wheel against the panel, while my left fingers are between the drill and the panel. This keeps the drill chuck from coming into contact with your paint.Turn the drill on high speed and try to keep the contact point of the wheel on the line of adhesive. Use medium pressure with the wheel against the panel. I now use my left hand to slightly move the wheel up and down while using my right hand to slowly push the drill left or right moving thru the line of adhesive. Take your time. After about going over 6 inches of the line of adhesive, stop and take a microfiber towel and rub HARD across the area you went over. The eraser wheel makes a huge mess. It is rubber and flakes off as it works. It will leave a thick tan residue on the paint. That is why it is necessary to have a high quality microfiber towel. It is best to use a short nap microfiber that you can see the individual nubs on the surface of the towel. Rub HARD with this towel to remove the tan residue left from the eraser wheel. This will not scratch your paint. Also know that the eraser wheel will get very hot. This why you don’t want to try to remove the whole line of adhesive all at one time. It needs to cool some. Know that the eraser wheel will smear the adhesive on the paint. That is why you want to keep the eraser wheel moving in an up and down motion as you use it, but don’t use a WIDE pattern because it smears the adhesive further. Some areas of the adhesive will be thicker than others, so it will require a second pass and possible a third pass. Always wipe the area with the microfiber after each pass to remove the residue left by the eraser wheel, otherwise the residue from the wheel keeps building up and you really aren’t getting down to the adhesive.IMPORTANT TIP: it is not necessary to use a wet cleaner or liquid adhesive remover of any kind while using the eraser wheel. If you do, you will only slow down the process. I thought I would be smart and use Goo Gone and 3M specialty adhesive remover after each pass of the eraser wheel after I had wiped off the tan residue left by the wheel. I thought this would further soften the adhesive and make it easier to remove. It did exactly the opposite. It also softened the eraser wheel and made it gummy. It smeared the adhesive more and made it harder to remove. AFTER you have made 2 – 3 passes with the eraser wheel and removed all the adhesive, then you can use goo gone to remove any residue left. Finally use a 50/50 isopropol alcohol/ water mix to remove all reside. I suggest you use a high quality automotive paint rubbing compound to remove any faint ghosting of the paint in the area where the adhesive was. Follow by polishing the entire door panel to blend and match the rest of the paint and then use a wax or sealer to protect the paint.

Worked as described! Very easy to use and it’s a great buy for the price. Perfect size for my door decal removal(it was an old work truck decal). It removed it fairly easy but it does wear out quicker than I thought but it worked!!!

Works well. To think I was going to try and peel off decade old vinyl by hand.Removed vinyl in minutes. Rubber burned down pretty quick, so if you have anything bigger than 1.5 sq ft, you might need a couple.Only complaint is the rubber wheel kept unscrewing itself and flying off the drill when it stopped spinning.

Works as intended. Made the removal of the faded, cracking and peeling decals on my Jeeps hood a breeze to remove!I've never used one before, I've always suffered through using a heat gun, plastic scraper, and lacquer thinner or some other chemical to aid in glue removal.This worked so much better once I had the hang of it. I ran it in my drill on low speed and applied light pressure on the wheel and after doing the first side of my hood I was able to remove the decals on the second side in a matter of minutes. I should have kept track of the time because it literally felt like 2 minutes went by. The only thing to do once you are done is buff the paint back to shiny with a polish of your choice.Just make sure not to let the wheel free spin when you stop, it will unthread itself and potentially mar something you don't want mared up, ask me how I know, lol.The pictures show an unpolished result and how much of the wheel that was left after both sides of the hood were done.

Posted a review on another multiple wheel set because I worry this one out. It’s great. If you don’t have one, buy one. Takes off wheel weight tape, stickers, glue, and most recently PPF residue. Never has harmed any finish I’ve used it on.

I bought this because I had very good luck with the 3M wheel but this was cheaper. This will work and it will get residue or stickers off but it leaves its own rubber residue that you would not have with the 3M wheel. Once I was done using it I ended up having to buff out the rubber residue which is easier than adhesive residue. Little disappointed but you get what you pay for

I have used many brands of these and for the price I will always go with these. It's very easy to use and works well on many different things. It removes double sided tape and decal in seconds. It's a good size to get into those tough to reach places. Its built well and last long.

Worked great and was half the price of the other options. Look no further than this one! P.S - don't waste time with goo-gone, just buy this and keep your sanity when cleaning off automotive adhesive.