AIRIC Nylon Closed End Connectors Crimp Cap Wire Terminals

I have used these closed-end crimp connectors for 22 AWG and 18 AWG wire on a few projects, and they have worked out nicely. If you need a water-resistant connection, fill the open area with RTV silicone after crimping. Faster than soldering, especially when used in cramped areas where a soldering iron would be hard to maneuver. Use a quality crimp tool for quality results for any crimp connector.

This is designed for small electric wires like you might see inside an electronic device or appliance. With a proper crimp wrench the connectors are well suited to hold onto wires properly inserted and crimped. Price of the pack is reasonable for the quality and quantity.

I have been buying these connectors at my local hardware store. They were priced per each … this is a much better way to buy them and I used them quite often. Now I know where to find these in bulk and I can have them on-hand when I need them.

Hard to get them crimped with the tools I have at least. So not having the right tool shouldn't cause a reduction in my rating but not sure what the tool is. I got to the point where I used narrow vise grips that clamped so tight it was hard to get them to release and the wires still pulled out on occasion. Probably my bad

I put in a new after market stereo in my car, these worked great. 100 might seem like a lot but if I add things and need to tap into wires I take off old ones add new ones, you lose some, couldn’t be happier

Perfect for installing a radio I don't do much like butt connectors they will come a loose on you and I don't like solder to Missy and it takes too long so white caps is what I need!!!!!!

Perfect for car stereo installation

Thank you! Works great!